Adrada Poly Gel Application Instructions
1. Push back your cuticles, prep and cleanse your nails.
2. Apply Adrada Nail Prep/Bond liquid on your nail beds.
3. Apply Adrada Base Coat UV/LED Gel avoiding touching your skin and cure for 60 seconds under LED lamp or 120s under UV lamp.
4. Over natural nails: Pick up a bead of Adrada Poly Gel with a metal gel spatula and place it on the middle of the nail bed. Wet a poly gel brush with 70% isopropyl alcohol or slip solution and remove excess with a paper towel so the brush is damp. Pat down the poly gel to spread, form and shape the nail to the desired thickness. When the brush starts to feel sticky, wet it again and continue. Cure it under LED lamp for 2 minutes or more depending on thickness. Curing time varies depending on lamp wattage. Wipe with alcohol to remove sticky layer. File and shape nail. Apply Adrada No Wipe UV Top Coat and cure for 60 seconds under LED lamp. You are done!
Nail length extension: Follow step 1. Next, place a nail form under your natural nail. Follow step 3. Then, apply Adrada Poly Gel on your nail bed close to the tip of your natural nail. Proceed with step 4.
Using dual forms: Follow steps 1, 2 and 3. Pick up a bead of Adrada Poly Gel with a metal gel spatula and place it on the inside of the dual form. Wet a poly gel brush with 70% isopropyl alcohol or slip solution and remove excess with a paper towel so the brush is damp. Pat down the poly gel to spread, smooth and even out. Press the dual form gently on your nail bed. Remove any excess poly gel that popped out from the sidewalls with alcohol. Cure the top of the nail for 2 minutes and the underside for 2 minutes. Curing time varies depending thickness and lamp wattage. Lift a corner of the dual form to pop off and remove it. Wipe the underside with alcohol to remove the sticky layer. File and shape nail. Apply Adrada No Wipe UV Top Coat and cure for 60 seconds under LED lamp.